You probably have heard all about coilovers and their amazing benefits for car owners. So, you have decided to go for the upgrade and you have bought a set of coilovers. But do you know how to install and adjust them? Probably not, which is why you are here.
And we are here to help! We will provide you with a step-by-step guide on how to install coilovers and then adjust the height according to your specifications.
Gather the Tools
Before you even think about doing the work yourself, you must ensure that you have the right kind of tools for the job. The last thing you want is to get stuck in the middle with no way to go forward.
You will need a hammer, a wheel spanner, an assortment of wrenches, a socket set, and ratchet, a jack stand, and a floor jack. You might need a few more things but that depends on your particular car. So, confirm with a mechanic’s workshop before beginning or consult a factory service manual.
Remove The Wheel
Once you have all your tools in order, you can start by removing the wheel from the car. There is nothing new to this procedure, and you must have done it a hundred times before. But for those of you who are new to this, we will explain briefly.
The first step is to place the floor jack underneath the car at a suitable point. The area is marked underneath the vehicle, and you can’t miss it even if you try. Once you have the jack in position, move over to the tire and undo the nuts using the wheel spanner. You should loosen the lug nuts slightly and not completely.
The next step is to raise the car high enough to remove the tire from the hub. Thereafter, you should place the jack stand and remove the floor jack from its position.
Remove the Old Suspension
The suspension is held in place by a series of nuts and bolts. Undo them using the various wrenches and sockets. There is not much to it, especially when you’re removing the strut and not the other components. The only nuts you might miss are the ones that are underneath the hood and connected to the strut mount. Remove them as well, and take out the strut and coil springs.
Install the Coilover
The next part is to install the Coilover in the exact place as the old suspension. Once that is done, you can tighten all the undone bolts and secure the coils in place. Coilovers are very simple and easy to install, so you don’t have to worry about modifications.
Adjust the Height
Twist the collars on the Coilover to tweak the height of your car. Set it to your preference, and make sure that you have the same height on both the axles. Otherwise, you could seriously damage to your car.
Lower the Car
All that is left is installing the tire, removing the jack stand, and lowering the car. You can change the ride height in this position by repeating the above step.
Wheel Alignment in Summerville SC
After you have done the installation, go for a wheel alignment. If you are around the Summerville area, why not get the best wheel alignment Summerville, SC? This way, you can stay worry-free about your tires and suspension.